Models:

• RT-7690-2XP includes: Laser tool, RF remote control/laser detector, rod bracket, AC/DC adapter, laser target, laser enhancement glasses, hard shell kitbox and user guide (Note: accessories are U.S. configuration only).
  
  
• RT-7690-2XPKT also includes: RT-7690-2XP, 123 Tripod™ (RT-A1150-123) and Grade Rod (RT-A1450)
  
  
• Also available: Standard powered models RT-7690-2 and RT-7690-2KT

RT-7690-2XP / RT-7690-2 Specifications:

• Accuracy:
  - Level: +/- 1/8" @ 100' (3mm @ 30M)
  - Plumb: +/- 1/4" @ 100' (6mm @ 30M)
  
  
• Operating Range:
  - RT-7690-2XP: Up to 1000' (305m) diameter with Laser Detector.
  - RT-7690-2: Up to 600' (180m) diameter with Laser Detector
  
  
• Line Dither/Scan Mode: 6 line lengths (3°-180°)
  
  
• Spin Mode: Variable Speed: (3 speeds) 350, 600, 1200rpm
  
  
• Plumb Alignment Range (Yaw): +/- 2 degrees
  
  
• Recalibration: On the jobsite
  
  
• Pendulum Lock: Protects pendulum during transportation and storage for added durability
  
  
• Laser Diode: Class IIIA, 2 635nm diodes
  
  
• Laser Output Power: Up to 5mW
  
  
• Tripod Mount: 5/8" x 11
  
  
• Operating Temperature: 14°F (-10°C) to 122°F (50°C)
  
  
• Storage Temperature: -4°F (-20°C) to 158°F (70°C)
  
  
• Power Supply: 4 "D" batteries (not included) or A/C power adaptor
  
  
• Warranty: One year limited
  
  
• All-in-One Laser Detector/ Rf Remote Control:
  
  - Controls all laser functions
  
  - Coarse / Fine Adjustment
  
  - Beeper: On / off - 80dB
  
  - 2-Sided LCD Display

Features:

• RT-7690-2XP: The high-power automatic leveling, remote controlled, simultaneous level and plumb rotational laser system for interior and exterior applications.
  
  
• Level, Plumb and Crossliner Beams: Six adjustable line lengths and three variable speed spin modes allow customization of the beam lengths and brightness to meet the specific level, plumb and crossliner applications and lighting conditions. the included laser beam detector/receiver can be used to detect the laser beam in lighting conditions where the beam is not visible, even in bright sunlight.
  
  
• Dual Pendulum Automatic Leveling Technology: Patented dual pendulum automatic leveling system utilizes gravity to consistently automatic level, eliminate set up time guarantee accuracy and transfer reference points to multiple locations with high repeatability.
  
  
• Automatic Out of Level Sensing: The laser tool has both audio (beeper) and visual (blinking laser beam) out lf level indication that signals if the units is out of level after initial set up. This eliminates tool status checks and costly errors, saving time and money.
  
  
• Radio Frequency (RF) Remote Control: The RF remote control allows for non-directional, unobstructed operation of all the laser functions anywhere on a cluttered jobsite. No line of sight required. the remote control allows for one-man operation of the laser system from the point of application, saving time and labor.
  
  
• User Recalibration: Easy user calibration guarantees performance to specification and keeps the tool on the jobsite, saving time and money.
  

Applications:

• Carpentry: Level and set cabinets and countertops; Level and plumb decks; Plumb framing and partition walls.
  
  
• Concrete: Set forms and footings. Electrical: Level electrical outlets; Check conduit clearance; Layout conduit and wiring.
  
  
• Plumbing: Layout piping, sewer lines, drainage and feed lines; Set grade.
  
  
• Flooring: Layout tile
  
  Other: Set ridge beams; Install siding, wall tile and masonry walls; Set landscape grade; Install drop ceiling, Layout walls; Layout duct work.
  
  

Application Illustrations: